(1) Prepare materials for use with wGlue (Stone, mold, various auxiliary materials) (2) Prepare tools, a toothpick, a cotton swab. You can use the professional Vacuum Machine for more sophisticated work (3) Latex gloves (4) wGlue consists of two parts. A PART is a MAIN RESIN, B PART is a HARDENER (5) A PART and B PART at a ratio of 1: 1. Similar size when viewed by eyes (6) For accurate weighing, use the scale (7) Mix A part and B part together (8) Roll with palms and fingers and knead (9) If you see stripes, you should more mix (10) 30~60 seconds. Mixing finished (11) After the mixing is finished, you can work for about 60 minutes. (12) Prepare materials to bond to wglue (13) Place the kneaded wglue in the position to be applied (14) Please press it with your fingers. make it flat (15) Wrap a double-sided tape on the tip of a toothpick (16) Use a sticky surface to pick up the stone and place it on the wGlue (17) The stone is pressed deep enough to hold it in place (18) Repeat setting (19) After the setting is completed, full curing takes place after 24 hours at room temperature